allied part number t olerance (%) t est freq. mhz, 200mv dcr ( 25%) all specif icat ions subject to change wit hout not ice. multilayer power chip inductor mlpc15n6 15 allied components interna tional 949-356-1780 www.a llie d c o m pone n ts. c o m rohs 06/07/2016 dimensions: inches (mm) features ? 1008 eia size ? multilayer ferrite construction ? high current capacity electrical inductance range: 0.47h ~ 4.7h tolerance: 20% across entire range test frequency: 3mhz, 200mv operating temp: -55oc to +125oc isat current: based on a 30% inductance drop from its original value without current. resistance to soldering heat pre-heating: 150oc, 1min solder composition: sn/ag3.0/cu0.5 solder temperature: 260 5oc test equipment (l): agilent hp4287a + 16197a, 3mhz, 200mv dcr: hp 4338b, or equivalent physical packaging: 3000 pieces per 7 inch reel. marking: none also available in 30% immersion time: 10 1sec ? excellent solderability characteristics no damage with more than 75% coverage inductance within 20 of initial value. 0.0490.008 (1.250.20) 0.0990.008 (2.50.2) 0.0240.008 (0.60.2) 0.0394 max (1.0 max) 0.0490.008 (1.250.20) 0.0790.008 (2.00.20) recommended pad layout 0.1220.016 (2.7~3.5) 0.0630.012 (1.3~1.9) 0.090.012 (2.0~2.6) irms (ma) max irms current: based on a 40oc temperature rise from 25oc ambient without current. ferrite terminal electrode mlpc15n6-r47m-rc MLPC15N6-1R0M-RC mlpc15n6-2r2m-rc mlpc15n6-3r3m-rc mlpc15n6-4r7m-rc 0.47 1.0 2.2 3.3 4.7 inductance (h) 20 20 20 20 20 3 3 3 3 3 0.04 0.055 0.08 0.10 0.11 1800 1600 1300 1200 1100 1500 900 500 400 300 isat (ma) max ? low dcr
|